Key Features
Continuous / Peak Power: 1200W continuous / up to ~1270W peak
Efficiency: 80 PLUS Platinum
Compliance: ATX 3.1, EPS 12V v2.92
PCIe Support: 2 x native 12V-2×6 PCIe 5.1 connectors plus 3 x 6+2-pin PCIe connectors
Rail Design: Single high-capacity 12V rail for stable handling of transient power spikes
Cooling: 140mm Pure Wings 3 fan with semi-passive zero-RPM mode at low load
Topology: Advanced LLC + SR + DC/DC topology with digital control
Modularity: Fully modular flat and sleeved cables for optimal airflow and clean builds
Warranty: 10-year manufacturer’s warranty; MTBF >100,000 hours

Full Technical Specification

Model / MPN:
Power Zone 2 1200W (BP030EU)

Form Factor:
ATX 3.1 (EPS 12V v2.92)

Power Output:
1200W continuous / ~1270W peak

Efficiency Rating:
80 PLUS Platinum

Input Voltage:
100–240VAC

Input Frequency:
50–60Hz

Input Current:
~15A @ 230VAC, ~7.5A @ 115VAC

Power Factor:
0.97 at full load (active PFC)

Modern Standby:
Supported; low standby power consumption

Operating Temperature:
Up to 40°C

MTBF:
100,000 hours at 25°C

Rail Operation:
Single 12V rail rated at approximately 100A+

Additional Rails:
+3.3V and +5V auxiliary rails; -12V and +5VSB supported

Hold-up Time:
Compliant with ATX 3.1 specifications

Protections:
OCP, OVP, UVP, OPP, OTP, SCP, surge and inrush protection

Fan:
140mm Pure Wings 3 fan with semi-passive zero-RPM operation

Noise Levels:
Extremely quiet at low to medium loads; increases gradually under sustained full load

Modularity:
Fully modular cable system using flat and sleeved cables

Cable Length:
Up to ~100cm maximum cable length

Connectors:
1 x 20+4-pin ATX
1 x 8-pin CPU (P8 / EPS)
1 x 4+4-pin CPU (P4+4 / EPS)
2 x 12V-2×6 PCIe 5.1
3 x 6+2-pin PCIe
7 x SATA power
1 x PATA (legacy)

Dimensions:
~160 x 150 x 86mm (W x D x H)

Warranty:
10-year limited manufacturer’s warranty

The post be quiet! Power Zone 2, 1200W, Semi-passive zero-RPM cooling, 2 x 90′ angled 12V-2×6 connectors and PCIe 5.1/ATX 3.1 compatibility, 10-year manufacturer’s warranty. appeared first on Computer Assistance.

Exceptional quiet, superior features
Pure Power 13 M 1200W is an ATX 3.1 compliant and PCIe 5.1 compatible power supply with semi-passive cooling. It offers peerless dependability with best-in-class features. Having both a PCIe 5.1 cable and PCIe 6+2 cables in the scope of delivery, this PSU offers outstanding compatibility with current-gen and next-gen graphics cards. Pure Power 13 M 1200W offers the best combination of features with outstanding compatibility.

80 PLUS Gold efficiency (up to 93.5%)
ATX 3.1 PSU with full support for PCIe 5.1 GPUs and GPUs with 6+2 pin connectors
Handles massive power excursions
Exceptionally silent semi-passive 120mm be quiet! fan
Semi-passive construction for quiet and energy-saving operation
LLC technology for advanced stability and voltage regulation
One massive high-performance 12V-rail
One PCIe 5.1 12V-2×6 600W and 4 PCIe 6+2 connectors for overclocked high-end GPUs
Full suite of safety features
Meets latest requirements for modern standby
10-year manufacturer’s warranty

Specifications

General data
ModelPURE POWER 13 M | 1200W
Continuous power (W)1200
Peak power (W)1250
Form factorATX 3.1
Form factor EPS 12VVersion 2.92
TopologyLLC + SR + DC/DC
Digitally controlled-
Voltage (Vac)100 – 240
Frequency (Hz)50 – 60
Input current (A)15 / 7.5
Power factor at 100% load>0.97
Modern standbyYes
Power consumption in standby (W)<0.1
Average life time (h / 25°C)>100,000
Operating temperature up to (°C)40

Efficiency

80 PLUS certificationGold
Cybenetics ETAGold
Efficiency (%) at 230V, 2% load75.9
Efficiency (%) at 230V, 10% load91.2
Efficiency (%) at 230V, 20% load93.4
Efficiency (%) at 230V, 50% load93.6
Efficiency (%) at 230V, 100% load90.8

Fan and cooling technology
Cybenetics LAMBDAA
FanSilence-optimized be quiet! fan
Fan size (mm)120
Bearing technologyRifle
Motor technology4-pole fan motor
Max. fan speed (rpm)2700
dB(A) at 10% load9.8
dB(A) at 20% load9.8
dB(A) at 50% load11.6
dB(A) at 100% load32.3

Output
Multi-rail operation (12V rails)-
12V single rail operationYes
Overclocking key-
+3.3V (A)22
+5V (A)22
+12V1 (A)100
+12V2 (A)N/A
+12V3 (A)N/A
+12V4 (A)N/A
+12V5 (A)N/A
+12V6 (A)N/A
-12V (A)0.3
+5Vsb (A)3
Max. combined power 12V (W)1200
Max. combined power 12V-2×6 (W)600
Max. combined power 3.3V + 5V (W)120
Hold-up time at 100% load (ms)19.11
Hold-up time at 80% load (ms)25.54
Power good signal (ms)100 – 150

Cables and connectors
Modular cablesYes
Sleeved cablesYes
Flat cablesYes
Maximum cable length (cm)95
Cable length to motherboard (cm)55
No. of cables8
ATX-Motherboard (20+4-pin)1
P4+4 (CPU)1
P8 (CPU)1
P4 (CPU)-
12V-2×6 cables1
PCI-E 6+2-pin (GPU)4
PCI-E 6-pin (GPU)-
SATA6
PATA2
FDD (Floppy)-

Protection
OTP (over temperature protection)Yes
OCP (over current protection)Yes
OPP (over power protection)Yes
SCP (short circuit protection)Yes
OVP (over voltage protection)Yes
UVP (under voltage protection) Yes
SIP (Surge & Inrush protection)Yes

Safety certification
BSMIYes
CBYes
CCCYes
CEYes
cRUus-
cTUVusYes
CUYes
FCCYes
RCMYes
TÜVYes
UKCAYes
IRAMYes

Environmental directives
ENERGY STAR9.0
ErPYes
WEEEYes
RoHSYes
Triman-

Scope of delivery
Thumb screws-
ScrewsYes
Cable tiesYes
Velcro cable ties-
User manual languagesCN, DE, EN, ES, FR, JP, PL, RU, TW
OCK slot bracket with switch / OCK jumper-
SFX-to-ATX adapter bracket-

Casing
Dimensions without cable (L x W x H), (mm)160 x 150 x 86
Weight (kg)2.69
ColorBlack

Service
Warranty (Years)10
Express replacement service in first year-
International hotline / free of chargeYes/ DE, FR

The post be quiet! Pure Power 13 M 1200W PSU, 80 PLUS Gold, Exceptionally Quiet 120mm Fan, ATX 3.1, 10 Year Warranty appeared first on Computer Assistance.

It offers peerless dependability with best-in-class features. Having both a PCIe 5.1 cable and PCIe 6+2 cables in the scope of delivery, this PSU offers outstanding compatibility with current-gen and next-gen graphics cards. Pure Power 13 M 1000W offers the best combination of features with outstanding compatibility.

Features
80 PLUS Gold efficiency (up to 94.4%)
ATX 3.1 PSU with full support for PCIe 5.1 GPUs and GPUs with 6+2 pin connectors
Handles massive power excursions
Exceptionally silent semi-passive 120mm be quiet! fan
Semi-passive construction for quiet and energy-saving operation
LLC technology for advanced stability and voltage regulation
One massive high-performance 12V-rail
One PCIe 5.1 12V-2×6 600W and 4 PCIe 6+2 connectors for overclocked high-end GPUs
Full suite of safety features
Meets latest requirements for modern standby
10-year manufacturer’s warranty

Specifications

General data

Model: Pure Power 13 M | 850W
Continuous power (W): 850
Peak power (W): 900
Form factor:Version 3.1
Form factor EPS 12V: Version 2.92
Topology: LLC + SR + DC/DC
Digitally controlled: No
Voltage (Vac): 100 – 240
Frequency (Hz): 50 – 60
Input current (A):12 / 6
Power factor at 100% load: >0.98
Modern standby:Yes
Power consumption in standby (W): <0.1
Average life time (h / 25°C): >100,000
Operating temperature up to (°C): 40

Efficiency

80 PLUS certificationGold
Efficiency (%) at 230V, 2% load 70.5
Efficiency (%) at 230V, 10% load 90.0
Efficiency (%) at 230V, 20% load 93.2
Efficiency (%) at 230V, 50% load 94.4
Efficiency (%) at 230V, 100% load 92.8

Fan and cooling technology

Cybenetics NoiseRating: No
Fan: Silence-optimized be quiet! fan
Fan size (mm) 120
Bearing technology: Rifle
Motor technology: 4-pole fan motor
Max. fan speed (rpm): 2000
dB(A) at 10% load: n/a
dB(A) at 20% load: 12.9
dB(A) at 50% load: 13.2
dB(A) at 100% load: 30.2

Output

Multi-rail operation (12V rails):No
12V single rail operation: Yes
Overclocking key: No
+3.3V (A): 22
+5V (A): 22
+12V1 (A): 70.9
+12V2 (A): N/A
+12V3 (A): N/A
+12V4 (A): N/A
+12V5 (A): N/A
+12V6 (A): N/A
-12V (A): 0,3
+5Vsb (A): 3
Max. combined power 12V (W): 850
Max. combined power 12V-2×6 (W): 600
Max. combined power 3.3V + 5V (W): 120
Hold-up time at 100% load (ms): 25.09
Hold-up time at 80% load (ms): 33.38
Power good signal (ms): 100 – 150

Cables and connectors

Modular cables: Yes
Sleeved cables: Yes
Flat cables: Yes
Maximum cable length (cm): 95
Cable length to motherboard (cm): 55
No. of cables: 8
ATX-Motherboard (20+4-pin): 1
P4+4 (CPU): 1
P8 (CPU): 1
P4 (CPU): No
12V-2×6 cables: 1
PCI-E 6+2-pin (GPU): 4
PCI-E 6-pin (GPU): No
SATA: 6
PATA: 2
FDD (Floppy): No

Protection

OTP (over temperature protection): Yes
OCP (over current protection): Yes
OPP (over power protection): Yes
SCP (short circuit protection): Yes
OVP (over voltage protection): Yes
UVP (under voltage protection): Yes
SIP (Surge & Inrush protection): Yes

Safety certification
BSMI: Yes
CB: Yes
CCC: Yes
CE: Yes
cRUus: No
cTUVus: Yes
CU: Yes
FCC: Yes
RCM: Yes
TÜV: Yes
UKCA: Yes
IRAM: No

Environmental directives

ENERGY STAR: 8.0
ErP: Yes
WEEE: Yes
RoHS: Yes
Triman: Yes

Scope of delivery

Thumb screws: No
Screws: Yes
Cable ties: Yes
Velcro cable ties: No
User manual languages: CN, DE, EN, ES, FR, JP, PL, RU, TW
OCK slot bracket with switch / OCK jumper: No
SFX-to-ATX adapter bracket: No

Casing

Dimensions without cable (L x W x H), (mm): 160 x 150 x 86
Weight (kg): 2.62
Color: Black

The post be quiet! Pure Power 13 M 850W is ATX 3.1 compliant and PCIe 5.1 compatible,10-year manufacturer’s warranty. appeared first on Computer Assistance.

It offers peerless dependability with best-in-class features. Having both a PCIe 5.1 cable and PCIe 6+2 cables in the scope of delivery, this PSU offers outstanding compatibility with current-gen and next-gen graphics cards. Pure Power 13 M 1000W offers the best combination of features with outstanding compatibility.

Features
80 PLUS Gold efficiency (up to 94.2%)
ATX 3.1 PSU with full support for PCIe 5.1 GPUs and GPUs with 6+2 pin connectors
Handles massive power excursions
Exceptionally silent semi-passive 120mm be quiet! fan
Semi-passive construction for quiet and energy-saving operation
LLC technology for advanced stability and voltage regulation
One massive high-performance 12V-rail
One PCIe 5.1 12V-2×6 450W and 4 PCIe 6+2 connectors for overclocked high-end GPUs
Full suite of safety features
Meets latest requirements for modern standby
10-year manufacturer’s warranty

Specifications

General data

Model: Pure Power 13 M | 650W
Continuous power (W): 650
Peak power (W): 720
Form factor:Version 3.1
Form factor EPS 12V: Version 2.92
Topology: LLC + SR + DC/DC
Digitally controlled: No
Voltage (Vac): 100 – 240
Frequency (Hz): 50 – 60
Input current (A):10/ 5
Power factor at 100% load: >0.98
Modern standby:Yes
Power consumption in standby (W): <0.1
Average life time (h / 25°C): >100,000
Operating temperature up to (°C): 40

Efficiency

80 PLUS certificationGold
Efficiency (%) at 230V, 2% load 71.1
Efficiency (%) at 230V, 10% load 90.0
Efficiency (%) at 230V, 20% load 93.1
Efficiency (%) at 230V, 50% load 94.2
Efficiency (%) at 230V, 100% load 92.8

Fan and cooling technology

Cybenetics Noise Rating: No
Fan: Silence-optimized be quiet! fan
Fan size (mm) 120
Bearing technology: Rifle
Motor technology: 4-pole fan motor
Max. fan speed (rpm): 1800
dB(A) at 10% load: n/a
dB(A) at 20% load: 12.9
dB(A) at 50% load: 13.2
dB(A) at 100% load: 30.2

Output

Multi-rail operation (12V rails):No
12V single rail operation: Yes
Overclocking key: No
+3.3V (A): 20
+5V (A): 20
+12V1 (A): 54.1
+12V2 (A): N/A
+12V3 (A): N/A
+12V4 (A): N/A
+12V5 (A): N/A
+12V6 (A): N/A
-12V (A): 0,3
+5Vsb (A): 3
Max. combined power 12V (W): 650
Max. combined power 12V-2×6 (W): 450
Max. combined power 3.3V + 5V (W): 120
Hold-up time at 100% load (ms): 22.5
Hold-up time at 80% load (ms): 30.66
Power good signal (ms): 100 – 150

Cables and connectors

Modular cables: Yes
Sleeved cables: Yes
Flat cables: Yes
Maximum cable length (cm): 95
Cable length to motherboard (cm): 55
No. of cables: 7
ATX-Motherboard (20+4-pin): 1
P4+4 (CPU): 1
P8 (CPU): No
P4 (CPU): 1
12V-2×6 cables: 1
PCI-E 6+2-pin (GPU): 2
PCI-E 6-pin (GPU): No
SATA: 5
PATA: 2
FDD (Floppy): No

Protection

OTP (over temperature protection): Yes
OCP (over current protection): Yes
OPP (over power protection): Yes
SCP (short circuit protection): Yes
OVP (over voltage protection): Yes
UVP (under voltage protection): Yes
SIP (Surge & Inrush protection): Yes

Safety certification
BSMI: Yes
CB: Yes
CCC: Yes
CE: Yes
cRUus: No
cTUVus: Yes
CU: Yes
FCC: Yes
RCM: Yes
TÜV: Yes
UKCA: Yes
IRAM: No

Environmental directives

ENERGY STAR: 8.0
ErP: Yes
WEEE: Yes
RoHS: Yes
Triman: Yes

Scope of delivery

Thumb screws: No
Screws: Yes
Cable ties: Yes
Velcro cable ties: No
User manual languages: CN, DE, EN, ES, FR, JP, PL, RU, TW
OCK slot bracket with switch / OCK jumper: No
SFX-to-ATX adapter bracket: No

Casing

Dimensions without cable (L x W x H), (mm): 160 x 150 x 86
Weight (kg): 2.32
Color: Black

The post be quiet! Pure Power 13 M 650W is ATX 3.1 compliant and PCIe 5.1 compatible, 10-year manufacturer’s warranty appeared first on Computer Assistance.

Key Features
80 PLUS® Gold efficiency (up to 93.8%).
ATX 3.1 PSU with full support for PCIe 5.1 GPUs and GPUs with 6+2 pin connectors.
Exceptionally silent 120mm be quiet! fan with semi-passive operation.
Advanced stability and voltage regulation thanks to LLC technology.
One high-performance 12V rail.
One PCIe 5.1 12V-2×6 (300W) and 2 PCIe 6+2 connectors for modern GPUs.
10-year manufacturer’s warranty.

Full Specification

Model:
Pure Power 13 M 550W 80+ Gold Modular Power Supply

Output Power:
550W continuous, 600W peak

Efficiency:
80+ Gold (up to 93.8% efficiency)

Voltage Rails:
Single 12V rail, 45.8A output

ATX Form Factor:
ATX 3.1

Connectors:
1 x 24-pin ATX
1 x 4+4-pin CPU +12V (EPS)
1 x PCIe 5.1 12V-2×6 (300W)
2 x PCIe 6+2-pin
5 x SATA
2 x Molex (PATA)

Fan:
120mm be quiet! silence-optimised fan, rifle bearing

Cooling:
Semi-passive, temperature-controlled operation

Fan Noise:
14.8 dB(A) at 20–50% load
20.8 dB(A) at 100% load

Power Input:
100–240V AC, 50/60Hz

Power Output:
+3.3V: 20A
+5V: 20A
+12V: 45.8A (550W max combined)
-12V: 0.3A
+5Vsb: 3A

Cable Set:
Fully modular flat and sleeved cables
Max length: 95cm

Special Features:
Future-proof ATX 3.1 and PCIe 5.1 support
Semi-passive silent operation
Robust 12V rail design
Full suite of safety protections

Warranty:
10-year manufacturer’s warranty

Dimensions (L x W x H):
160 x 150 x 86 mm

The post be quiet! Pure Power 13 M 550W is ATX 3.1 compliant and PCIe 5.1 compatible, 10-year manufacturer’s warranty appeared first on Computer Assistance.

Key Features
• 80 PLUS® Titanium & Cybenetics Titanium efficiency (up to 95.4%)
• ATX 3.1 PSU with full support for PCIe 5.1 GPUs and GPUs with 6+2 pin connectors
• Selectable active or semi-passive cooling with rear switch
• Integrated Silent Wings 135mm fan for virtually inaudible operation
• Aluminum heat sink design for excellent thermal performance
• Full bridge + LLC + SR technology for peak stability & ultra-low ripple
• Overclocking key for switching between multi-rail and single-rail modes
• Fully modular sleeved cables for clean builds
• High-end 105°C Japanese capacitors
• 10-year manufacturer’s warranty

Full Specification

Model:
Dark Power 14 | 1200W Titanium Power Supply

Output Power:
1200W continuous / 1300W peak

Efficiency:
80 PLUS Titanium (up to 95.4% efficiency)

Voltage Rails:
4 x 12V rails (switchable to single-rail using OCK button)

ATX Form Factor:
ATX 3.1

Connectors:
1 x ATX 20+4-pin
1 x 4+4-pin CPU
1 x 8-pin CPU
2 x 12V-2×6 PCIe 5.1
4 x 6+2-pin PCIe
13 x SATA
2 x PATA

Fan:
135mm be quiet! Silent Wings (FDB, 6-pole motor)

Fan Speed Control:
Active or semi-passive selectable
Post-ventilation: 2–5 minutes cooldown

Fan Noise:
8 dB(A) at 10–20% load
21.1 dB(A) at 100% load

Power Input:
200–240V AC, 50/60Hz

Power Output:
12V DC (up to 1200W combined)
3.3V + 5V combined: 120W

Cable Set:
Fully modular sleeved cables (up to 120cm)
ATX, EPS, PCIe 5.1, PCIe 6+2, SATA, PATA

Special Features:
Titanium efficiency, selectable cooling modes, overclocking switch, ultra-low ripple, premium capacitors, silent fan design

Protection:
OTP, OCP, OPP, OVP, UVP, SIP (no SCP listed)

Dimensions without cable (L x W x H), (mm)
175 x 150 x 86

Warranty:
10-year manufacturer’s warranty

The post be quiet! DARK POWER 14, 1200W, 80 PLUS certified and Cybenetics efficiency, ATX 3.1 compliant, PCIe 5.1 compatible, backed by a 10-year manufacturer’s warranty. appeared first on Computer Assistance.

The be quiet! Dark Power 14 850W is a high-performance ATX 3.1 PSU designed for silent, efficient, and reliable power delivery. Featuring 80 PLUS Titanium and Cybenetics Titanium efficiency, it supports PCIe 5.1 GPUs, advanced overclocking, and comes with fully modular, sleeved cables for a clean, high-end build. Its active and semi-passive cooling modes, high-quality Japanese capacitors, and state-of-the-art technology make it ideal for gamers, enthusiasts, and workstation builds.

Key Features
• 80 PLUS Titanium efficiency (up to 95.6%)
• ATX 3.1 PSU supporting PCIe 5.1 GPUs and GPUs with 6+2-pin connectors
• Active and semi-passive cooling with a push-button switch
• Silent Wings 135 mm fan integrated into large heat sink
• Overclocking key for multi-rail or single-rail operation
• Full bridge + LLC + Synchronous Rectifier technology for high efficiency and stability
• Premium Japanese 105°C capacitors
• Fully modular, sleeved cables up to 120 cm
• 10-year manufacturer warranty

Full Specification

Model:
Dark Power 14 850W

Output Power:
Continuous: 850 W
Peak: 950 W

Efficiency:
80 PLUS Titanium (up to 95.6%)
Efficiency at 2% load: 71.4%
Efficiency at 10% load: 91.5%
Efficiency at 20% load: 94.4%
Efficiency at 50% load: 95.6%
Efficiency at 100% load: 93.8%

Voltage Rails:
Multi-rail 12V (4 rails)
Overclocking key: Yes

ATX Form Factor:
ATX 3.1

Connectors:
• 1 x 20+4-pin ATX motherboard
• 1 x 4+4-pin CPU
• 1 x 8-pin CPU
• 1 x 12V-2×6 cables
• 4 x PCIe 6+2-pin
• 13 x SATA
• 2 x PATA
• Floppy: No

Fan:
135 mm Silent Wings
6-pole fan motor, fluid-dynamic bearing
Max. speed: 2100 rpm
Noise at 100% load: 16 dB(A)

Protection Features:
OTP, OCP, OPP, OVP, UVP, SIP

Input:
100–240 V AC, 50–60 Hz
Input current: 10/5 A
Power factor: >0.98

Dimensions & Weight:
175 x 150 x 86 mm
Weight: 2.2 kg

Modular Cables:
Fully modular, sleeved, flat cables
Max cable length: 105 cm
Motherboard cable length: 60 cm

Warranty:
10 years

The post be quiet! DARK POWER 14, 850W, 80 PLUS certified and Cybenetics efficiency, ATX 3.1 compliant, PCIe 5.1 compatible, backed by a 10-year manufacturer’s warranty. appeared first on Computer Assistance.

Proven Reliability, Quiet Operation System Power 11 is the ATX 3.1 PSU for value-oriented PC builders that do not want to pass on reliability and quietness.

Highlights

ATX 3.1 PSU with support for PCIe 5.1 GPUs and GPUs with 6+2 pin connectors
Temperature-controlled 120mm quality fan reduces system noise
Rock-solid stability with a strong 12V-rail
Tight voltage regulation using DC-to-DC technology
Up to one PCIe 5.1 12V-2×6 600W and up to 3 PCIe 6-2 connectors for high-end GPUs
Dependable operation to support powerful GPUs
Stand-by drain of less than 0.15 watts
80 PLUS Bronze efficiency (up to 90.0 %)
5-year manufacturer’s warranty
Product conception, design and quality control in Germany

General

Model
System Power 11 750 W

Continuous power (W)
750

Peak power (W)
No

Form factor
Version 3.1

Form factor EPS 12V
Version 2.92

Topology
Double forward + DC-DC

Digitally controlled
No

Voltage (Vac)
200 – 240

Frequency (Hz)
50

Input current (A)
5

Power factor at 100% load
>0.98

Modern standby
Yes

Power consumption in standby (W)
<0.1 Average life time (h / 25°C)
>100,000

Operating temperature up to (°C)
40

Efficiency
80 PLUS certification
Efficiency (%) at 230V, 2% load65.5 Bronze
Efficiency (%) at 230V, 10% load 85.0 Bronze
Efficiency (%) at 230V, 20% load 89.1 Bronze
Efficiency (%) at 230V, 50% load 90.0 Bronze
Efficiency (%) at 230V, 100% load 86.6 Bronze

Fan and cooling technology

Cybenetics Noise Rating
No

Fan
Silence-optimized be quiet! fan

Fan size (mm)
120

Bearing technology
Rifle

Motor technology
4-pole fan motor

Max. fan speed (rpm)
2100

dB(A) at 10% load
10.5

dB(A) at 20% load
10.5

dB(A) at 50% load
12.3

dB(A) at 100% load
33.4

Output

Multi-rail operation (12V rails)
No

12V single rail operation
Yes

Overclocking key
No

+3.3V (A)
20

+5V (A)
20

+12V1 (A)
62.5

+12V2 (A)
no

+12V3 (A)
No

+12V4 (A)
No

+12V5 (A)
No

+12V6 (A)
No

-12V (A)
0.3

+5Vsb (A)
3

Max. combined power 12V (W)
750

Max. combined power 12V-2×6 (W)
600

Max. combined power 3.3V + 5V (W)
120

Hold-up time at 100% load (ms)
17.34

Hold-up time at 80% load (ms)
21.50

Power good signal (ms)
100 – 150

Cables and connectors

Modular cables
No

Sleeved cables
P24

Flat cables
P4+4, P4, PCIe, drives

Maximum cable length (cm)
55

Cable length to motherboard (cm)
81

No. of cables
8

ATX-Motherboard (20+4-pin)
1

P4+4 (CPU)
1

P8 (CPU)
No

P4 (CPU)
1

12V-2×6 cables
1

PCI-e 6+2-pin (GPU)
2

PCI-e 6-pin (GPU)
No

SATA
6

PATA
1

FDD (Floppy)
No

Protection

OTP (over temperature protection)
Yes

OCP (over current protection)
Yes

OPP (over power protection)
Yes

SCP (short circuit protection)
yes

OVP (over Voltage protection)
Yes

UVP (under Voltage protection)
Yes

SIP (Surge & Inrush protection)
Yes

Safety certification

BSMI
No

CB
No

CCC
No

CE
Yes

cRUus
No

cTUVus
No

CU
Yes

FCC
No

RCM
No

TÜV
Yes

UKCA
Yes

IRAM
No

Environmental directives

Energy Star
8.0

ErP
Yes

WEEE
Yes

RoHS
Yes

Triman
No

Scope of delivery

Thumb screws
No

Screws
Yes

Cable ties
Yes

Velcro cable ties
No

User manual languages
No

OCK slot bracket with switch / OCK jumper
No

SFX-to-ATX adapter bracket
No

Casing

Dimensions without cable (L x W x H), (mm)
86 x 150 x 140

Weight (kg)
2.04

Color
Black

Logistics data and RRP

Dimensions, package (L x W x H), (mm)
268 x 195 x 97

Gross weight, package (kg)
2.4

Pieces per packaging unit
6

Dimensions, shipping box (L x W x H), (mm)
556 x 311 x 218

Gross weight, shipping box (kg)
15.6

Service

Warranty (Years)
5

The post be quiet! System Power 11 750W is ATX 3.1 compliant and PCIe 5.1 compatible, 5-year manufacturer’s warranty appeared first on Computer Assistance.

Proven Reliability, Quiet Operation System Power 11 is the ATX 3.1 PSU for value-oriented PC builders that do not want to pass on reliability and quietness.

Highlights

ATX 3.1 PSU with support for PCIe 5.1 GPUs and GPUs with 6+2 pin connectors
Temperature-controlled 120mm quality fan reduces system noise
Rock-solid stability with a strong 12V-rail
Tight voltage regulation using DC-to-DC technology
Up to one PCIe 5.1 12V-2×6 600W and up to 3 PCIe 6-2 connectors for high-end GPUs
Dependable operation to support powerful GPUs
Stand-by drain of less than 0.15 watts
80 PLUS Bronze efficiency (up to 90.0 %)
5-year manufacturer’s warranty
Product conception, design and quality control in Germany

General

Model
System Power 11 650 W

Continuous power (W)
550

Peak power (W)
No

Form factor
Version 3.1

Form factor EPS 12V
Version 2.92

Topology
Double forward + DC-DC

Digitally controlled
No

Voltage (Vac)
200 – 240

Frequency (Hz)
50

Input current (A)
5

Power factor at 100% load
>0.98

Modern standby
Yes

Power consumption in standby (W)
<0.1 Average life time (h / 25°C)
>100,000

Operating temperature up to (°C)
40

Efficiency
80 PLUS certification
Efficiency (%) at 230V, 2% load63.9 Bronze
Efficiency (%) at 230V, 10% load 84.4 Bronze
Efficiency (%) at 230V, 20% load 88.6 Bronze
Efficiency (%) at 230V, 50% load 89.7 Bronze
Efficiency (%) at 230V, 100% load 86.7 Bronze

Fan and cooling technology

Cybenetics Noise Rating
No

Fan
Silence-optimized be quiet! fan

Fan size (mm)
120

Bearing technology
Rifle

Motor technology
4-pole fan motor

Max. fan speed (rpm)
2100

dB(A) at 10% load
10.9

dB(A) at 20% load
10.9

dB(A) at 50% load
11.8

dB(A) at 100% load
30.9

Output

Multi-rail operation (12V rails)
No

12V single rail operation
Yes

Overclocking key
No

+3.3V (A)
20

+5V (A)
20

+12V1 (A)
54.17

+12V2 (A)
no

+12V3 (A)
No

+12V4 (A)
No

+12V5 (A)
No

+12V6 (A)
No

-12V (A)
0.3

+5Vsb (A)
3

Max. combined power 12V (W)
650

Max. combined power 12V-2×6 (W)
450

Max. combined power 3.3V + 5V (W)
120

Hold-up time at 100% load (ms)
17.04

Hold-up time at 80% load (ms)
21.10

Power good signal (ms)
100 – 150

Cables and connectors

Modular cables
No

Sleeved cables
P24

Flat cables
P4+4, P4, PCIe, drives

Maximum cable length (cm)
55

Cable length to motherboard (cm)
79

No. of cables
8

ATX-Motherboard (20+4-pin)
1

P4+4 (CPU)
1

P8 (CPU)
No

P4 (CPU)
1

12V-2×6 cables
1

PCI-e 6+2-pin (GPU)
2

PCI-e 6-pin (GPU)
No

SATA
5

PATA
1

FDD (Floppy)
No

Protection

OTP (over temperature protection)
Yes

OCP (over current protection)
Yes

OPP (over power protection)
Yes

SCP (short circuit protection)
yes

OVP (over Voltage protection)
Yes

UVP (under Voltage protection)
Yes

SIP (Surge & Inrush protection)
Yes

Safety certification

BSMI
No

CB
No

CCC
No

CE
Yes

cRUus
No

cTUVus
No

CU
Yes

FCC
No

RCM
No

TÜV
Yes

UKCA
Yes

IRAM
No

Environmental directives

Energy Star
8.0

ErP
Yes

WEEE
Yes

RoHS
Yes

Triman
No

Scope of delivery

Thumb screws
No

Screws
Yes

Cable ties
Yes

Velcro cable ties
No

User manual languages
No

OCK slot bracket with switch / OCK jumper
No

SFX-to-ATX adapter bracket
No

Casing

Dimensions without cable (L x W x H), (mm)
86 x 150 x 140

Weight (kg)
1.97

Color
Black

Logistics data and RRP

Dimensions, package (L x W x H), (mm)
268 x 195 x 97

Gross weight, package (kg)
2.4

Pieces per packaging unit
6

Dimensions, shipping box (L x W x H), (mm)
556 x 311 x 218

Gross weight, shipping box (kg)
15.2

Service

Warranty (Years)
5

The post be quiet! System Power 11 650W is ATX 3.1 compliant and PCIe 5.1 compatible, 5-year manufacturer’s warranty appeared first on Computer Assistance.

Key Features
Power Output: 450?W continuous
Certification: 80 PLUS Bronze (up to 89% efficiency at 230?V)
Compliance: ATX 3.1, EPS 12V v2.92
PCIe Support: Supports PCIe 5.1 GPUs via 2 x 6+2-pin connectors
Cooling: Temperature-controlled 120?mm rifle-bearing fan
Protection Features: OCP, OVP, UVP, OPP, OTP, SCP, surge and inrush protection
Cabling: Fully wired (non-modular) flat black cables
Warranty: 5-year manufacturer’s warranty

Full Technical Specification

Model / MPN:
System Power 11 450?W (BP009EU)

Form Factor:
ATX

Compliance:
ATX 3.1, EPS 12V v2.92

Power Output:
450?W continuous

Efficiency Certification:
80 PLUS Bronze (up to 89% at 50% load)

Input Voltage:
200–240?VAC

Input Frequency:
50?Hz

Input Current:
Up to 4 A

Power Factor:
= 0.98 at full load

Standby Power:
< 0.15?W Operating Temperature:
0–40 °C

MTBF:

100,000 hours at 25 °C

12V Rail:
Single 12 V rail at 37.5 A

Protections:
OCP, OVP, UVP, OPP, OTP, SCP, surge, inrush

Fan:
120 mm rifle-bearing, temperature-controlled

Noise Level:
~10.5 dB(A) at light load, up to ~19.1 dB(A) at full load

Modularity:
Non-modular

Connectors:
1 x 20+4-pin ATX
1 x 4+4-pin CPU (EPS)
2 x 6+2-pin PCIe
5 x SATA
1 x Molex (4-pin PATA)

Cable Type:
Flat black cables

Cable Length:
Up to 90 cm

Dimensions:
150 mm (W) x 140 mm (D) x 86 mm (H)

Weight:
~1.7 kg

Certifications:
CE, CB, TUV, RoHS, UKCA, WEEE, ErP, Energy Star

Warranty:
5 years

The post be quiet! System Power 11 450W is ATX 3.1 compliant and PCIe 5.1 compatible, 5-year manufacturer’s warranty appeared first on Computer Assistance.